How to fix the Christmas icicle lights?

Introduction

C:UserszainiAppDataLocalMicrosoftWindowsINetCacheContent.MSO41F82F38.tmp

The Christmas icicle lights are one of the essence of the holiday period. Every year, all the families pull out the holiday lights from their backyard and round it up around their trees for the Christmas period. But the sad part is that almost half of your icicle lights won’t work, and you are forced to throw them away. However, you should not throw them as you can attempt to rather fix them. You might think that you will have to work hard, and the process might get annoying, but you can actually fix the lights through some simple procedures. 

Do not use bulbs with high voltage

The first and foremost thing that you need to do is lay down all the lights and check which one of them are not functioning. You might well need to buy some of the bulbs for replacement. The important thing to notice here is that unlike the old days, the burning out of one light will not affect the working of others. All the bulbs are usually connected in a parallel circuit having minimal volts. So, make sure that you do not connect bulbs having high voltage as they might burn out immediately.

Divide the string of lights into Chunk

In case some of the bulbs of your light are working and other ones are not, the best thing that you can do here is divide the string of lights into various chunks. Since these lights are connected in a series, a small error in the connection can cause the string of lights to burn out. Hence, if one is able to locate the error, then it will be easy enough to check out what’s wrong and rectify the mistake. Make sure to mark the ends of chunks with different colored tapes so as to distinguish between them.

C:UserszainiAppDataLocalMicrosoftWindowsINetCacheContent.MSO1A28B206.tmp

Make sure you have a piece of paper to record all the bulbs as you are testing through the stream of lights. The most common mistake that people do is that as soon as they find the error, they cut through that particular end and throw away that particular portion. However, they should not throw away the bulk straight away. Rather, they should pull out the stream of lights from the usual line and test them later on. 

The next thing that you should do is take out the unworking lights and test them one by one on a stream of normal lights. This is to make sure if the lights are actually working or not. In case they are, you are good to go. However, if they are not, you need to go through the process again to check out for all the possible errors and rectify them. 

Although the process might seem to be extremely tedious, it is very helpful in nature. You get to see for all the errors in the bulbs and pick out the ones that actually are working. If you are looking for Christmas icicle lights, do check our website.